GATE MOUNTED SWING GATE OPENERS

Hydraulic & Mechanical Pistons

Generally a more economical gate automation system than the underground system, Hydraulic pistons or Electro-mechanical rams are mounted on the back of each gate leaf. This form of automation is particularly popular on wooden five bar farm type gates, although it is equally suited to most timber and wrought iron gate designs.

Automation Kit	Max Gate Width (M)
	< 3	< 3.5	< 4	+ 4
Chamberlain Liftmaster - ECO-300
Chamberlain Liftmaster - LYN-300
Chamberlain Liftmaster -SCS-300
Chamberlain Liftmaster - ECO-400
Chamberlain Liftmaster -LYN-400
FAAC - 418
FAAC - 415
FAAC - 400
BFT - P Series
BFT - Lux
BFT - Oro
BFT - Phobos

Underground Swing Gate Opener Kits

Designed to be concealed underground, below the gate hinge, these openers are popular on decorative wrought iron gates, being virtually invisible. Unlike other underground motors on the market, the BFT hydraulic operator has a built in hydraulic pump eliminating unsightly pump units mounted above ground. Hydraulic motors have fewer moving parts than mechanical equivalents, thus extending the lifespan of the motors.

Automation Kit	Max Gate Width (M)
	< 3	< 3.5	< 4	+ 4
Chamberlain Liftmaster - Sub-300
BFT -Sub-R
BFT - Eli 250
FAAC - S700
FAAC - 770

Sliding Gate Kits

We have a range of models to cope with both domestic and commercial automatic sliding gates. The motor units are secure and space saving and the system has a lockable release mechanism in the event of a power failure. Our range of motors can operate any gate weighing up to 4 tonnes.

Automation Kit	Max Gate Width (M)
	< 3	< 3.5	< 4	+ 4
Chamberlain Liftmaster - ART-300
BFT - Virgo
BFT - Igea
FAAC - 391

Heavy Duty & Wind Effected Gate Kits

HEAVY DUTY: High end installs and commercial / industrial applications.

WIND AFFECT: A closed panel gate will be affected significantly by the wind, whereas an open pattern gate will offer little wind resistance. Imagine trying to hold on to a 6ft square panel in gusty conditions. This sail effect warrants an upgrade in equipment specified and may require the addition of an electronic lock.

Automation Kit	Max Gate Width (M)
	< 3	< 3.5	< 4	+ 4
BFT - Lux
BFT - P Series
BFT -Sub-R
BFT - Oro
FAAC - S700
FAAC - 400

Existing gates or new gates?

Most existing manual gates can be converted to automatic. Call 0870 766 8704 and we will be able to offer you advice as to any changes that may be necessary.

It is important to consider the physical condition of the gateposts and to ensure that they are suitable for mounting the gate openers and accessories.

If you are considering a new installation, please fill in our site assessment form and we will be able to advise you or your contractor of the exact requirements regarding post sizes, positions, suitable gates and any cable provisions etc.

How will my gates operate?

Gates can be automated to either swing open or to slide open and in the case of swinging gates the opener may be concealed underground or may be gate mounted. The most suitable opener for your installation will depend on the space available and the type of gate selected.

Controlling your gates?

GateAuto have a wealth of experience in providing access control solutions for your automatic gate. Whilst it may seem that you just want to control your gates by hand held remote control there is usually more to consider: Postman, milkman, waste disposal, paperboy etc. Friends and relatives arriving by vehicle and on foot.

Remote Controls:

There are 2 remote controls provided with each kit. The unique security frequency of a radio control allows the operator to open the gates without getting out of the car.

Vehicle Induction Loops:

Vehicle detection loops can be installed discreetly under the tarmac or at the side of the driveway allowing the presence of vehicles to open the gates and prevent closing whilst obstructed. Timers can be used to restrict the use of these induction loop detectors, only allowing entry/exit by vehicles during agreed times.