770 Closed gate stop kit (per motor)

770 FAAC closed gate stop kit

Iron Gates

Closed Wooden Gates *

Specification Max Wing Length : 4m Max Wing Weight : 600kgs @ 2.5m

Downloadable PDF's Information

* WIND AFFECTED GATES: A closed panel gate will be affected significantly by the wind, whereas an open pattern gate will offer little wind resistance. Imagine trying to hold on to a 6ft square panel in gusty conditions. This sail effect warrants an upgrade in equipment specified and may require the addition of an electronic lock. Call 0870 766 8704 for advice or click here for alternative options

Application: Usage is with the 770 Underground sub kit. When gate is closed this is the stop kit to help the underground sub kit work.

*This is not an automatic gate operator, below is information about the 770 Underground Sub kit

Features:
- Standard kit operates to 110° with hard stops in the ground, only 95° with stops in boxes
- Underground swing gate electro-mechanical operator for residential gates of single leaf of 2.5m and max weight of 500kg
- Available in 230V and 24V versions, it is self locking and is equipped with a lever style manual release mechanism.
- Stops for the open and closed positions are available as an accessory and are fitted to the foundation box saving time on installation.
- 24V version has a virtual encoder built on to the control board which reverses upon detection of an obstacle and an optional battery backup in case of a power cut
- Foundation box is supplied with stainless steel lids
- 180 degree kit must be used if gates mounted on rear of posts